Hi,welcome to CLEAN-LINK!

How to maintain the air filter

2018-10-15

In the process of transportation, installation and use, it should be carried out according to requirements to ensure the use effect. After using the filter for a period of time, the dust is trapped on the surface of the filter material, so that the efficiency and resistance of the filter are lowered, which affects the cleanliness of the air supply. In this case, the filter needs to be replaced in time.

1. All kinds of filters are not allowed to open the packaging bag or packaging film before installation; and store the filter in the direction marked on the package; during handling, it should be handled gently and gently to avoid violent vibration and collision.

2. For high-efficiency filters, the installation direction must be correct: when the corrugated plate combination filter is installed vertically, the corrugated plate must be perpendicular to the ground; the connection between the vertical and the frame of the filter is strictly prohibited from leakage, deformation and damage. And leakage of glue, etc., after installation, the inner wall must be clean, free of dust, oil, rust and debris.

3. Test method: Observe or wipe with a white silk cloth.

4. Before installing the high-efficiency filter, the clean room must be thoroughly cleaned and cleaned. If there is dust inside the air-conditioning system, it should be cleaned and wiped clean again to meet the cleaning requirements. If a high-efficiency filter is installed in the technical interlayer or ceiling, the technical layer or the ceiling should also be thoroughly cleaned and wiped clean.

5. The transport and storage of high-efficiency filters should be placed in the direction of the manufacturer's logo. During transportation, it should be handled gently to prevent severe vibration and collision, and does not allow rough handling.

6. Before installation of the high-efficiency filter, the package must be unpacked at the installation site for visual inspection, including: filter paper, sealant and frame for damage; side length, diagonal and thickness dimensions are met; frame is burr-free and Rust spots (metal frame); whether there is a product certificate, technical performance meets the design requirements. Then in accordance with the national standard "clean room construction and acceptance specifications" [JGJ71-90] method of inspection, qualified should be installed immediately.

7. High-efficiency filter with cleanliness level equal to or higher than Class 100 clean room. Before installation, it should be leaked according to the method specified in “Cleanhouse Construction and Acceptance Specification” [JGJ71-90] and meet the specified requirements.

8. When installing the high efficiency filter, the arrow on the outer frame should be consistent with the airflow direction; when it is installed vertically, the direction of the filter paper fold should be perpendicular to the ground.

9. Install a coarse plate or folding filter with the galvanized mesh facing the back of the air.

To install the bag filter, the length of the filter bag should be perpendicular to the ground, and the direction of the filter bag should not be installed parallel to the ground;

10. Under normal conditions of use, flat plate, folding type coarse or medium efficiency filter, usually replaced once in January and February, after the filter material is replaced, it can be soaked and rinsed with water containing detergent, then dried and then changed. On; after a general rinse 1-2 times, a new filter must be replaced to ensure filtration efficiency.

11. For bag type coarse or medium efficiency filters, under normal conditions of use (average 8 hours per day, continuous operation), the new one should be replaced after 7-9 weeks.

12. For sub-high efficiency filters, under normal conditions of use (average 8 hours per day, continuous operation), generally used for 5-6 months, should also be replaced.

13. For the above filter, if there is a differential pressure gauge or differential pressure sensor before and after the filter, the coarse filter must be replaced when the pressure difference is greater than 250Pa; for the medium efficiency filter, the differential pressure is greater than At 330Pa, it must be replaced; for sub-high efficiency filters, when the pressure difference is greater than 400Pa, it must be replaced, and the original filter can not be reused;

14. For high-efficiency filters, when the resistance value of the filter is greater than 450Pa; or when the airflow velocity of the windward surface drops to the low limit of Zui, the airflow speed cannot be increased even after replacing the coarse and medium-efficiency filter; If there is an unrepairable leak on the surface of the high-efficiency filter, a new high-efficiency filter must be replaced. If the above conditions are not met, it can be replaced once every 1-2 years depending on the environmental conditions.

15. In order to give full play to the role of the filter, the upstream wind speed of the filter during the selection and use, the coarse and medium efficiency filter should not exceed 2.5m/s, and the sub-high efficiency filter and high efficiency filter should not exceed 1.5. m / s, this will not only help to ensure the efficiency of the filter, but also extend the life of the filter and save costs.

16. When the equipment is running, generally do not replace the filter; if the filter has not been replaced due to the replacement period, only the coarse and medium efficiency filters can be replaced in the case of non-stop fans; sub-high efficiency filter and high efficiency filter It must be stopped before it can be replaced.

17. The gasket between the filter and the connecting frame must be tight and leak-free to ensure the filtration effect.

18. For high-efficiency filters that need to be used in high humidity and high temperature environments, filter papers with high temperature and high humidity resistance, partition plates and frame materials must be selected to meet the production requirements.

19. The biological clean room and the medical clean room must use the filter of the metal frame, and the surface should be not easy to rust. It is not allowed to use the filter of the wooden frame plate to prevent bacteria and affect the product.

Guest Book
Name:
Tel:
Email:
Address:
Message: